3AA PROPOLYMER® HAZ-LO® FLASHLIGHT

Description

ATEX Rated and Intrinsically Safe LED Flashlight

This SAFETY RATED FLASHLIGHT was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.

• High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
• “Captured locking” set screw will not back out -prevents FOD (Foreign Object Debris)
• Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
• Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
• Combination of visual and mechanical polarity protection ensures correct installation of batteries
• Light designed to not power on if batteries are installed incorrectly
• 3 “AA” alkaline batteries reduce battery and recycling costs by 25%
• LED technology that is impervious to shock with a 50,000 hour lifetime – provides 120 lumens; runs 6.5 hours
• Sealed switch design protects it from corrosion caused by battery leakage
• One body electronic LED module mechanically attached to electronic assembly
• Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
• Regulated run time provides consistent performance throughout battery life
• O-ring sealed, dust-proof, water-tight enclosure
• IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
• 3 meter impact resistance tested
• Ergonomically designed for maximum hand comfort
• 7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included)
• Limited Lifetime Warranty
• ATEX-rated for Category 1GD (Zone 0, 20) locations. IECEx-rated for Zone 0 and 20, Group IIC and IIIC locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum surface temperature of <135°C.
• Assembled in the USA
• RoHS compliant

PRODUCT SPECIFICATIONS