3N PROPOLYMER® HAZ-LO® ATEX FLASHLIGHT

Ships via freight 1-2 weeks

ATEX Rated LED Flashlight Torch

ATEX-rated for Category 1G (Zone 0) locations. IECEx-rated for Zone 0, Group IIIC locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.

Description

ATEX Rated LED Flashlight Torch

ATEX-rated for Category 1G (Zone 0) locations. IECEx-rated for Zone 0, Group IIIC locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <135°C.

Rated for Category 2G (Zone 1) explosive gas group IIB locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of 135°C.

  • Three ultra-bright white LEDs provide a soft flood beam for up-close tasks
  • 30 lumens; 35m beam distance; runs 10 hours; 300 candela
  • Impact and chemical resistant polymer resin; o-ring sealed and vented; impact resistant polymer facecap overmolded onto polycarbonate lens
  • IPX4 water resistant; 2 meter impact resistance tested
  • Operating Temperature: -20°F to 130°F (to maintain hazardous locations rating: -20°C to 40°C)
  • Push-button tail switch for one-handed operation
  • Powered by 3 “N” alkaline batteries (included)
  • 13.33 cm; 59.54 grams with batteries
  • Available in orange

PRODUCT SPECIFICATIONS

High Lumens30
Run Time10.00 hours
Beam Distance35 meters
Max Candela300
Battery TypeN Alkaline
Battery Quantity3
Length5.25 inches (13.34 centimeters)
Weight2.10 ounces (59.53 grams)
ColorsOrange

 

3N-PROPOLYMER®-HAZ-LO®-ATEX-FLASHLIGHT.pdf

Reviews

There are no reviews yet.

Be the first to review “3N PROPOLYMER® HAZ-LO® ATEX FLASHLIGHT”

Your email address will not be published.