High Volume Remote Controlled Monitors - SOS Safety International Inc.

High Volume Remote Controlled Monitors

/, Nozzles/High Volume Remote Controlled Monitors

High Volume Remote Controlled Monitors

High Volume Electric Actuated Remote Control Monitors from Williams Fire & Hazard Control (WF&HC) are designed to be mounted at elevated positions for fixed applications.  They have a programmable oscillation capability for automatic operations, but may also be overridden with a matched Hydro-Foam™ nozzle operated remotely through the use of a joystick and switches on a consolidated control panel.  In addition, manual operation can also be accomplished locally through the use of hand-wheels.

Categories: , Tags: ,

Description

High Volume Electric Actuated Remote Control Monitors from Williams Fire & Hazard Control (WF&HC) are designed to be mounted at elevated positions for fixed applications.  They have a programmable oscillation capability for automatic operations, but may also be overridden with a matched Hydro-Foam™ nozzle operated remotely through the use of a joystick and switches on a consolidated control panel.  In addition, manual operation can also be accomplished locally through the use of hand-wheels.  Foam concentrate can be proportioned at the nozzle through the use of a jet ratio controller and atmospheric concentrate storage tank.  They are ideal high volume discharge devises of water and foam solutions for mitigating fire, flammable or toxic chemical vapour and other hazards to protect refineries, chemical processing areas, ship loading docks, etc.

These monitors are variations of the best-selling Ranger 3+ and Ambassador Monitors from WF&HC.  6” or 8” fabricated stainless steel waterways provide maximum flow efficiency, minimum friction loss, and the ultimate in product longevity.  Flowing 1,500 – 4,000 gpm (5,678 – 15,142 Lpm) and 2,500 – 6,000 gpm (9,464 – 22,712 Lpm), respectively, with maximum working pressure is 200 psi (13.8 bars).  All electric actuators are reversible, NEMA 7 explosion proof, refinery grade, FM Approved and C.S.A. certified.  Only power and control conductors are required.  No external controls, starters, or starters in motor control center are needed.  Monitors can be programmed to “return to home” position (horizontal, vertical, nozzle to wide angle fog) after use, automatically, whether P.L.C. controlled or hard wired.

Two direct mounted electric actuators with speed reducing gear drives installed on the motor enable remote control of horizontal position, as well as vertical trajectory.  Field-adjustable limit switches on each actuator allow 360º horizontal rotation and from -70º to +70º vertical travel.  Monitor traversing speed is a least 10º per second. A third direct-mounted electric actuator enables remote operation for the nozzle’s discharge pattern, from wide fog to straight stream.

Choose from Straight stream, Hydro-foam or Hydro-Chem nozzle.  The monitors are constructed with stainless steel waterway and swivels with stainless steel ball bearings.  Monitors include lifting lug for handling and mounting.  The gears are steel and bronze with a nickel plated brass shaft.   They are supplied with red epoxy finish.   The monitors and controls are designed for operation with temperatures as low as -20ºF (-29°C).  Weather protective cowlings are provided over all gears and shafts.  Standard motor voltage is 480/3/60.  Standard Control voltage is 120 VAC.  Other voltages are available upon request.

Ordering Information

 Part Number  Monitor  Nozzle  Raise Face Flange Size  Motor Voltage (3 phase/60 Hz)  Actuator
 13216  Ranger 3+  Hydro-Chem  6”  460VAC  EIM
 13273  Ranger 3+  Master Stream  6”  460VAC  EIM w/MODBUS
 13377  Ranger 3+  Master Stream  6”  230VAC  EIM
 13658  Ranger 3+  Master Stream  8”  460VAC  EIM
 14721  Ranger 3+  Master Stream  6”  208VAC  EIM 4 – 20 mA
 14722  Ranger 3+  Hydro-Foam  6”  460VAC  EIM
 14723  Ranger 3+  Master Stream  6”  460VAC  EIM
 14724  Ranger 3+  Hydro-Chem  6”  230VAC  EIM
 14725  Ranger 3+  Hydro-Foam  6”  230VAC  EIM
 14726  Ranger 3+  Hydro-Chem  6”  208VAC  EIM
 14727  Ranger 3+  Hydro-Foam  6”  208VAC  EIM
 14728  Ranger 3+  Master Stream  6”  208VAC  EIM
 14955  Ranger 3+  Master Stream  6”  208VAC  EIM 0 – 1000 KO
 13378  Ambassador  Ambassador  8”  460VAC  EIM 4 – 20 mA

 

Notes:
Above are examples of available configurations.  Many more are available.  Send inquiries to Williams for configurations addressing your specific application requirements.
Monitor Mounted Junction Box is NEMA 4X, pre-wired to monitor actuators, with all required electrical interface equipment.
Normally supplied with custom control panel — wireless options available.
Engineered Towers/Waterways (5’ to 40’ or 1.5 to 12 m) are available.
Matched water supply specialty deluge valve and strainer packages available

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.